Rozdíly
Zde můžete vidět rozdíly mezi vybranou verzí a aktuální verzí dané stránky.
Obě strany předchozí revize Předchozí verze | Poslední revize Obě strany příští revize | ||
mikrotik_60ghz [2021/10/14 22:06] simandl |
mikrotik_60ghz [2021/10/14 22:21] simandl |
||
---|---|---|---|
Řádek 43: | Řádek 43: | ||
Sent reboot command | Sent reboot command | ||
[root@ceskolipska bin]# | [root@ceskolipska bin]# | ||
+ | | ||
+ | ====== mikrotik 60GHz ====== | ||
+ | ===== Nastavení sektoru vysílání napevno ===== | ||
+ | |||
+ | set tx-sector=35 | ||
+ | 35/36 je idealni "center" | ||
+ | | ||
+ | | ||
+ | https://download.mikrotik.com/routeros/6.49/routeros-arm-6.49.npk | ||
+ | | ||
+ | [root@ceskolipska bin]# cp routeros-arm64-6.47.npk vmlinuz | ||
+ | |||
+ | [root@ceskolipska bin]# netinstall -r -a 10.33.13.15 ./vmlinuz | ||
+ | Will reset config | ||
+ | Using server IP: 10.33.13.1 | ||
+ | Starting PXE server | ||
+ | Waiting for RouterBOARD... | ||
+ | PXE client: C4:AD:34:B9:02:DA | ||
+ | Sending image: arm | ||
+ | TFTP timeout | ||
+ | PXE client: C4:AD:34:B9:02:DA | ||
+ | Len: 5600648Sending image: arm | ||
+ | Discovered RouterBOARD... | ||
+ | Formatting... | ||
+ | Sending package vmlinuz ... | ||
+ | Ready for reboot... | ||
+ | Sent reboot command | ||
+ | [root@ceskolipska bin]# | ||
+ | | ||
+ | [root@ceskolipska bin]# netinstall -r -a 10.33.13.15 ./routeros-arm64-6.49.npk | ||
+ | Will reset config | ||
+ | Using server IP: 10.33.13.1 | ||
+ | Starting PXE server | ||
+ | Waiting for RouterBOARD... | ||
+ | PXE client: C4:AD:34:B9:02:DA | ||
+ | Sending image: arm | ||
+ | TFTP timeout | ||
+ | PXE client: C4:AD:34:B9:02:DA | ||
+ | Len: 5600648Sending image: arm | ||
+ | Discovered RouterBOARD... | ||
+ | Formatting... | ||
+ | Sending package routeros-arm64-6.49.npk ... | ||
+ | Ready for reboot... | ||
+ | Sent reboot command | ||
+ | [root@ceskolipska bin]# | ||
+ | |||
+ | |||
+ | [root@ceskolipska bin]# netinstall -r -a 10.33.13.15 ./routeros-arm-6.49.npk | ||
+ | Will reset config | ||
+ | Using server IP: 10.33.13.1 | ||
+ | Starting PXE server | ||
+ | Waiting for RouterBOARD... | ||
+ | PXE client: C4:AD:34:B9:02:DA | ||
+ | Sending image: arm | ||
+ | TFTP timeout | ||
+ | PXE client: C4:AD:34:B9:02:DA | ||
+ | Len: 5600648Sending image: arm | ||
+ | Discovered RouterBOARD... | ||
+ | Formatting... | ||
+ | Sending package routeros-arm-6.49.npk ... | ||
+ | Ready for reboot... | ||
+ | Sent reboot command | ||
+ | [root@ceskolipska bin]# tcpdump -i eth0 host 10.33.13.15 | ||
+ | tcpdump: verbose output suppressed, use -v or -vv for full protocol decode | ||
+ | listening on eth0, link-type EN10MB (Ethernet), capture size 262144 bytes | ||
+ | 22:18:14.337698 ARP, Request who-has 10.33.13.15 tell 10.33.13.1, length 28 | ||
+ | 22:18:15.338149 ARP, Request who-has 10.33.13.15 tell 10.33.13.1, length 28 | ||
+ | 22:18:16.340182 ARP, Request who-has 10.33.13.15 tell 10.33.13.1, length 28 | ||
+ | ^C | ||
+ | 3 packets captured | ||
+ | 60 packets received by filter | ||
+ | 0 packets dropped by kernel | ||
+ | [root@ceskolipska bin]# ping 192.168.88.2 | ||
+ | PING 192.168.88.2 (192.168.88.2) 56(84) bytes of data. | ||
+ | 64 bytes from 192.168.88.2: icmp_seq=1 ttl=64 time=0.408 ms | ||
+ | 64 bytes from 192.168.88.2: icmp_seq=2 ttl=64 time=0.200 ms | ||
+ | ^C | ||
+ | --- 192.168.88.2 ping statistics --- | ||
+ | 2 packets transmitted, 2 received, 0% packet loss, time 1000ms | ||
+ | rtt min/avg/max/mdev = 0.200/0.304/0.408/0.104 ms | ||
+ | [root@ceskolipska bin]# | ||