Rozdíly
Zde můžete vidět rozdíly mezi vybranou verzí a aktuální verzí dané stránky.
Následující verze | Předchozí verze Následující verze Obě strany příští revize | ||
gigabeam_gi-core_wifiber_g1.25 [2019/05/05 23:50] 0.0.0.0 vytvořeno |
gigabeam_gi-core_wifiber_g1.25 [2020/10/02 21:05] simandl |
||
---|---|---|---|
Řádek 5: | Řádek 5: | ||
User with leve 1 logged to CLI can access and change all settings according to manual | User with leve 1 logged to CLI can access and change all settings according to manual | ||
- | [[Média:G1.25_Installation_and_Operations_Manual_031706.pdf]] | + | {{:wiki:g1.25_installation_and_operations_manual_031706.pdf|}} |
- | Basic setting overview: | + | Basic setting overview: |
- | 1 Login to the radio using CLI as an admin user (level 1). | + | 1 Login to the radio using CLI as an admin user (level 1). |
+ | |||
+ | Change ip address | ||
+ | 2 GVFR#c t | ||
+ | 3 GVFR(config)#conf | ||
+ | 4 GVFR(config-Conf)#ethernet | ||
+ | 5 GVFR(config-Conf-Ethernet)#set ipaddress 192.168.1.230 (default) | ||
+ | 6 GVFR(config-Conf-Ethernet)#set addressmask 255.255.255.0 | ||
+ | 7 GVFR(config-Conf-Ethernet)#set gateway 192.168.1.1 | ||
+ | |||
+ | Set admin password | ||
+ | 2 GVFR#c t | ||
+ | 3 GVFR(config)#conf | ||
+ | 4 GVFR(config-Conf)#async | ||
+ | 5 GVFR(config-Conf-async)#Admin | ||
+ | 6 GVFR(config-Conf-async-admin)#set password | ||
+ | The screen displays prompt for a new password | ||
+ | success {new password} | ||
+ | |||
+ | To save the configuration to flash, continue with the following commands: | ||
+ | 2 GVFR#c t | ||
+ | 3 GVFR(config)#conf | ||
+ | 4 GVFR(config-Conf)#misc | ||
+ | 5 GVFR(config-Conf-Misc)#set save on | ||
- | Change ip address | + | Check signal |
- | 2 GVFR#c t | + | configure terminal |
- | 3 GVFR(config)#conf | + | rad |
- | 4 GVFR(config-Conf)#ethernet | + | atpc |
- | 5 GVFR(config-Conf-Ethernet)#set ipaddress 192.168.1.230 (default) | + | get rxsignal |
- | 6 GVFR(config-Conf-Ethernet)#set addressmask 255.255.255.0 | + | |
- | 7 GVFR(config-Conf-Ethernet)#set gateway 192.168.1.1 | + | |
- | Set admin password | ||
- | 2 GVFR#c t | ||
- | 3 GVFR(config)#conf | ||
- | 4 GVFR(config-Conf)#async | ||
- | 5 GVFR(config-Conf-async)#Admin | ||
- | 6 GVFR(config-Conf-async-admin)#set password | ||
- | The screen displays prompt for a new password | ||
- | success {new password} | ||
- | |||
- | To save the configuration to flash, continue with the following commands: | ||
- | 2 GVFR#c t | ||
- | 3 GVFR(config)#conf | ||
- | 4 GVFR(config-Conf)#misc | ||
- | 5 GVFR(config-Conf-Misc)#set save on | ||
- | |||
- | Check signal | ||
- | TBD | ||
Check data link on sfp | Check data link on sfp | ||
TBD | TBD | ||
+ | |||
+ | Get rx signal | ||
+ | snmpwalk -Os -Cc -c public -v 1 10.33.8.2 enterprises.22113.2.11.4 | ||
+ | enterprises.22113.2.11.4.0 = STRING: "-40.200 `" | ||
+ | | ||
+ | Get tx signal | ||
+ | snmpwalk -Os -Cc -c public -v 1 10.33.78.210 enterprises.22113.2.11.2 -On | ||
+ | .1.3.6.1.4.1.22113.2.11.2.0 = STRING: "0.0313" |