= verze FW = M-M tak je tam nejlepší XM-5.5.11 a XW-5.5.10u2, když máš AC-M nebo AC-AC tak je nejlepší nejnovější

= airos = The config file is located at “/tmp/system.cfg”. To edit the file, use VI.

vi /tmp/system.cfg

Once you have edited your config file, you must save it to flash:

cfgmtd -f /tmp/system.cfg -w

Once you have saved it you can reboot by issuing the “reboot” command or you can do a soft apply:

/usr/etc/rc.d/rc.softrestart save

0@@

nový chipset u NanoBeam umí i short preamble.

XW.v5.5.6# iwpriv ath0 | grep pream

  shpreamble       (003E) : set   1 int   & get   0
  get_shpreamble   (003E) : set   0       & get   1 int

XW.v5.5.6# iwpriv ath0 get_shpreamble ath0 get_shpreamble:1 XW.v5.5.6# iwpriv ath0 shpreamble 0 XW.v5.5.6# iwpriv ath0 get_shpreamble ath0 get_shpreamble:0 XW.v5.5.6# iwpriv ath0 shpreamble 1 XW.v5.5.6# iwpriv ath0 get_shpreamble ath0 get_shpreamble:1 XW.v5.5.6#

= mFI mPort =

Pinout of connectors is described on http://wiki.ubnt.com/MFi-Custom_Sensors

set 12V for 3 seconds on all ports stored in /etc/persistent/roleta #set 12V echo 0x152C70 > /proc/gpio/sr_val sleep 3 #set 0V echo 0x100000 > /proc/gpio/sr_val

invoked remotely by ssh ubnt@192.168.1.20 /etc/persistent/roleta

Examples are stored in /usr/www/mfi/ and all seems to be under heavy development

MF.v1.0.3# cat README FILES

common.cgi:

A set of standard functions

USAGE Functions can be executed from CGI or the command line

Command Line Example:

1) wget -qO- "localhost/digitalWrite.cgi?pin=0&value=1&debug=1" | cat

2) cgi -q test.cgi

3) Add first line to top of file

  #!/usr/bin/cgi
  ./test.cgi